Basic Operations; Playback - Sony STR-DH130 Operating Instructions Manual

Basic Operations

Playback

,
V/v/B/b
1
Turn on the connected
equipment.
2
Turn on the receiver.
3
Press the input button which
corresponds to the equipment
you want.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display
panel.
Note
When you press TUNER, "FM TUNER" or
"AM TUNER" appears for a while, and then
frequency appears on the display panel.
4
Play back the source.
5
Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
GB
20
To activate the muting function
Press MUTING.
The muting function will be canceled when
you do the following.
• Press the button again.
• Increase the volume.
• Turn off the receiver.
Input
buttons
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
Naming inputs
AMP
MENU
You can enter a name of up to 8 characters for
MUTING
inputs (except TUNER) to appear on the
display panel.
MASTER
It is more recognizable having the equipment
VOL +/–
named on the display than the jacks.
1
Press the corresponding input
button which you want to
create an index name.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
3
Press V/v repeatedly to select
"NAME IN", then press
The cursor flashes and you can enter a
character.
4
Press V/v to select a character,
then press B/b to move the
input position backward and
forward.
Tips
• You can select the character type as follows
• To enter a blank space, press b without
by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
selecting a character.
or b.