Location Of Parts And Basic Operations; Front Panel Parts Description - Sony STR-DB925 Operating Instructions Manual

Location of
Parts and Basic
Operations
This chapter provides information
about the locations and functions of
the buttons and controls on the front
panel. It also explains basic
operations.
22 GB
Front Panel Parts
Description
1 1/u switch
Press to turn the receiver on and off.
• Before you turn on the receiver, make sure that you have
turned the MASTER VOLUME control to the leftmost
position to avoid damaging you speakers.
2 FUNCTION control
Rotate to select the component you want to use.
To select
VCR
Camcorder or video game VIDEO 3
TV tuner or LD player
DVD player
Tape deck
MD or DAT deck
CD player
Built in tuner
Turntable
After selecting the component, turn on the component
you selected and play the program source.
• After selecting VCR, camcorder, video game, DVD player,
or LD player, turn on the TV and set the TV's video input.
• When using digital inputs, there may be up to 6 seconds of
silence when switching functions or inserting new discs.
MODE button
Press to select and play another video/audio source in
combination with the selected component.
Each time you press the button, the display changes as
follows:
n V:XXX n A:XXX n selected component
Press MODE to display
V:XXX
A:XXX
• When the 5.1 INPUT (4) is selected, MODE displays
"V:XXX" only.
z Function indicators
Normally, the indicator above the selected function lights orange.
However, when MODE is used to select a different video (V:XXX)
or audio (A:XXX) source, the video function lights green and the
audio function lights orange. This also occurs when you select
audio components (like PHONO).
Rotate to light
VIDEO 1 or VIDEO 2
TV/LD
DVD
TAPE
MD/DAT
CD
TUNER
PHONO
And rotate FUNCTION to select
Any video source to enjoy with
the audio from the selected
component
Any audio source to enjoy with
the video from the selected
component