Basic Operations; Selecting The Component - Sony STR-DE590 Operating Instructions Manual

Basic Operations

Selecting the component

INPUT SELECTOR
Turn INPUT SELECTOR to select the
component you want to use.
To select
VCR
Satellite tuner
DVD player
MD or Tape deck
CD or Super Audio
CD player
Built in tuner
After turning on the component you selected,
select the component and play the program
source.
• After selecting VCR or DVD player, turn on the
TV and set the TV's video input to match the
component you selected.
INPUT MODE
Press INPUT MODE to select the input mode
for your digital components.
Each time you press the button, the input mode
of the currently selected component switches.
Select To
AUTO IN Give priority to digital
signals when there are both
digital and analog
connections. If there are no
digital signals, analog is
selected.
COAX IN Specify the digital audio
signals input to the
DIGITAL COAXIAL input
jacks.
Display
VIDEO 1 or VIDEO 2
VIDEO 2
DVD
MD/TAPE
CD/SACD
TUNER FM/AM
Select To
OPT IN Specify the digital audio
signals input to the
DIGITAL OPTICAL input
jacks.
ANALOG Specify the analog audio
signals input to the AUDIO
IN (L/R) jacks.
Note
When the 96 kHz digital signal is input, the tone,
sound field and surround effects do not function.
MULTI CH IN
Press MULTI CH on the remote to enjoy the
audio source connected to the MULTI CH IN
jacks. You can adjust balance and level of all
the speakers. When this function is on, the tone
and surround effects are turned off.
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and "SP A"
and "SP B" do not light up in the display.
continued
GB
21