Basic Operations; Selecting The Component - Sony STR-DE595 Operating Instructions Manual

Basic Operations

Selecting the component

Input Selector buttons
Press the input selector button to select the
component you want to use.
To select
VCR
Satellite tuner
DVD player
MD or Tape deck
CD player
CD or Super Audio
CD player
Built in tuner
After turning on the component you selected,
select the component and play the program
source.
• After selecting VCR or DVD player, turn on the
TV and set the TV's video input to match the
component you selected.
INPUT MODE
Press INPUT MODE to select the input mode
for your digital components.
Each time you press the button, the input mode
of the currently selected component switches.
Select To
AUTO IN Give priority to digital
signals when there are both
digital and analog
connections. If there are no
digital signals, analog is
selected.
COAX IN Specify the digital audio
signals input to the
DIGITAL COAXIAL input
jacks.
Press
VIDEO 1 or VIDEO 2
VIDEO 2
DVD
MD/TAPE
CD (STR-DE495 only)
CD/SACD
(STR-DE595 only)
TUNER FM/AM
Select To
OPT IN Specify the digital audio
signals input to the
DIGITAL OPTICAL input
jacks.
ANALOG Specify the analog audio
signals input to the AUDIO
IN (L/R) jacks.
Note
When the 96 kHz digital signal is input, the tone,
sound field and surround effects do not function.
MULTI CH IN
(STR-DE595 only)
Press MULTI CH IN to enjoy the audio source
connected to the MULTI CH IN jacks. You can
adjust balance and level of all the speakers. When
this function is on, the tone and surround effects
are turned off.
MULTI CHANNEL DECODING
indicator
(STR-DE595 only)
This indicator lights up when the unit is
decoding signals recorded in a multi channel
format.
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
continued
GB
21