Using Only The Front Speakers (2Ch Stereo); Listening To The Sound Without Any Adjustment (Analog Direct) - Sony STR-DG910 Operating Instructions Manual

Using only the front
speakers
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
AUX DMPORT
2CH A.F.D.
2CH
CATEGORY
SLEEP
MODE
Press 2CH.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to 2 channel stereo
sources using the front left/right speakers and a sub
woofer, select "A.F.D. AUTO" (page 61).
RECEIVER
MOVIE MUSIC
D.TUNING AUTO CAL
Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to 2 channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
?/1
MULTI CHANNEL DECODING
TONE MODE TUNING MODE
TONE TUNING
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ CATEGORY
ENTER MODE CATEGORY
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
Sound field
buttons
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press DIRECT on the receiver.
"A. DIRECT" appears on the display.
The analog audio is output.
To cancel ANALOG DIRECT
Press DIRECT on the receiver again.
You can also press any sound field buttons.
Notes
• When headphones are connected, "HP DIR"
appears on the display.
• This function is not available when DMPORT
input is selected.
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
2CH A.F.D. MOVIE MUSIC AUTO CAL DIRECT
2
1
65 US