Menu
Parameters
[Display]
[Display]
A. CAL
Auto Calibration on/off
[8-A. CAL]
[AUTO CAL]
(page 39)
Calibration type
[CAL TYPE]
Preset measurement loading
[CAL LOAD]
a)
For details, refer to the page in the parentheses.
b)
You can only select this parameter when the surround back speakers are set to "SINGLE".
c)
You can only select this parameter when the surround back speakers are set to "DUAL".
d)
When you select this parameter, the "HDMI" flashes on the display.
e)
When you set "CAL LOAD" in A. CAL menu to "LOAD YES", the setting is displayed as xx'xx" and
you can adjust the setting in 1 inch increment.
f)
This parameter is only available when at least one speaker is set to "SMALL" and "CAL LOAD" is set to
"LOAD NO" in A. CAL menu.
Settings
a)
A.CAL YES, A.CAL NO
a)
ENGINEER, FLAT, FRT REF
a)
LOAD NO, LOAD YES
Initial
setting
A.CAL NO
FLAT
LOAD NO
49
US