An easy-to-operate device, the RM602 is also designed to automatically synchronize its current time and date when brought within an approximate 1500km radius of the radio signal DCF77generated from Frankfurt, Germany. Other functions of the RM602 include dual daily alarms with snooze function and backlight.
A ANTENNA / STAND BATTERY INSTALLATION Receives RF signal for RF clock and rotate to the desired angle for viewing. 1. Remove the battery compartment door. B MODE BUTTON 2. Insert two AA-sized (UM-3) batteries. Changes among physical, emotional, intellectual and intuitive scans of individual users C UP [ ] BUTTONS...
• Current time and day-of-the-week BEFORE YOU BEGIN • Date • Place the RM602 on a flat, sturdy surface. • Time for ALARM 1 • Adjust the antenna to the best angle for viewing. The antenna • Time for ALARM 2 can be rotated through 0, 30, 60 and 90 degrees.
3. Press [CLOCK/ALARM]. 4. Enter the minutes using [ Reception 5. Press [CLOCK/ALARM]. complete No reception, or 6. Follow the same pattern to set year, month, day and date format Successful reception manually adjusted (day-month or month-day). Press [CLOCK/ALARM] to save the changes and exit. If changes For better reception of radio signals, place the clock away from are made for the minute, the seconds will reset and start from metal objects and electrical appliances to minimize interference.
To have a biorhythm scan, you have to enter the user’s birthday So, do a scan on your biorhythm and make the most of your day. first. The RM602 can support up to three users. To enter a birthday, 1. Select USER 1, 2 or 3 by pressing [USER].
Active Increasing Active Decreasing Critical Days Zero Day Passive Increasing Passive Decreasing HOW TO BIO-SCAN A PARTICULAR DAY 1. Select the user by pressing [USER]. 2. Select the bio element by pressing [MODE]. 3. Press [ ] for the previous day or [ ] for the next.
PRECAUTIONS CAUTION This unit is engineered to give you years of satisfactory service if handled carefully. — The content of this manual is subject to change without further notice. 1. Do not immerse the unit in water. — Due to printing limitation, the displays shown in this 2.