Agilent Technologies 8960 Series Reference Manual page 629

Hide thumbs Also See for 8960 Series:

Table of Contents

Hardware Configuration Report

You can generate a list of the test set's hardware configuration over the LAN or GPIB.

The LAN query is the easiest and most direct way to query the test set's hardware configuration. This method

uses your web browser to display a formatted report.

The GPIB query returns an unformatted character string that must be buffered and saved to an HTML file to

provide formatted text.

1. Refer to the SYSTEM CONFIG screen to determine the LAN address.

2. Open a web browser and enter <LAN address>/iconfig. For example, if your LAN address is 130.2.2.147,

you would enter:

130.2.2.147/iconfig

3. The web browser will then display formatted text. A partial list of the hardware configuration information

is shown below:

Use the following Basic example as a model to store the test set's configuration as an HTML file.

GPIB Example:

DIM Buf1$[20000],Buf2$[20000] ! This is the minimum space for the arrays

OUTPUT 714;"SYSTEM:CONFIGURE:INFORMATION:HARDWARE:VERBOSE?"

ENTER 714;Buf1$,Buf2$

CREATE "HW.htm",1

ASSIGN @File TO "HW.htm"

OUTPUT @File;Buf1$,Buf2$

! Create an HTML file

S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_conf_hw_report.fm

Hardware Configuration Report