Agilent Technologies 8960 Series Reference Manual page 463

Hide thumbs Also See for 8960 Series:
Table of Contents

Advertisement

STATus:OPERation:NMRReady:CDMA Register Bit Assignments
The STATus:OPERation:NMRReady:CDMA register bits indicate when a measurement has been completed
and new measurement results are available.
Bit
Binary
Number
Weighting
15
32768
14
16384
13
8192
12
4096
11
2048
10
1024
9
512
8
256
7
128
6
64
5
32
4
16
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
CTXSpurious New Measurement
Result Ready
GPOWer New Measurement
Result Ready
TROPower New Measurement
Result Ready
CAPPower New Measurement
Result Ready
CFERror New Measurement
Result Ready
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset and
while a measurement is in Measuring States. See
"Triggering of Measurements" on page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset and
while a measurement is in Measuring States. See
"Triggering of Measurements" on page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset and
while a measurement is in Measuring States. See
"Triggering of Measurements" on page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset and
while a measurement is in Measuring States. See
"Triggering of Measurements" on page
This bit is a 1 if the measurement has been
completed and has produced new results.
This bit is a zero at power on, after a preset and
while a measurement is in Measuring States. See
"Triggering of Measurements" on page
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_status_operation.fm
STATus:OPERation:
Description
185.
185.
185.
185.
185.
463

Advertisement

Table of Contents
loading

Table of Contents