W-CDMA Measurements
Measuring Code Domain Power and Error
1. Configure the mobile station to generate a 12.2 kbps or 64 kbps reference measurement channel (RMC).
2. Press the
key.
Measurement selection
3. Select the Code Domain measurement.
4. Press the Code Domain Setup (
) key.
F1
5. Set the measurement parameters as needed for your measurement situation.
Typical waveform quality results are shown above.
562
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_man_measurements.fm