5.6.12 Get Interface; 5.6.13 Get System - Alvarion BreezeACCESS-EZ Manual

Chapter 5 - Command Line Interface

5.6.12 get interface

This command displays the interface information for all connections.
Syntax
get interface <all | br0 | lo>
• all - Use to display all parameters for this command.
• br0 - Displays interface information about the SU-A-EZ.
• lo - Displays loopback interface information.
Default Setting
None
Command Mode
Installer, Admin
Example 1
Installer# get interface all
name type status
---------------------------------------------------------------
br0 bridge up
lo loopback up
Installer#
Example 2
Installer# get interface lo
Property Value
---------------------------
type loopback
status up
mac 00:00:00:00:00:00
ip 127.0.0.1
mask 255.0.0.0
Installer#

5.6.13 get system

This command displays detailed hardware and software information for the
system.
Syntax
get system <detail | model | bversion | version | platform>
• detail - Use to display all parameters for this command.
• model - The SU-A-EZ model number.
• bversion - The boot code version number.
• version - The software version number.
• platform - The design version for integrating software and hardware.
76
mac ip
00:10:E7:02:15:5D 10.0.0.1
00:00:00:00:00:00 127.0.0.1
mask
255.0.0.0
255.0.0.0
Operation