Save-Running; Set Config Default; Set Clientsta Status-Update - Alvarion BreezeACCESS-EZ Manual

5.6.1

save-running

This command allows you to save the running configuration to flash memory, so
that after a reboot the current configuration will be restored.
Syntax
save-running
Default Setting
No
Command Mode
Installer, Admin
Installer# save-running
Installer#
5.6.2

set config default

This command restores the factory default settings and restarts the system.
Syntax
set config default <yes | no>
• yes - Resets settings to the factory default and reboots the system.
• no - Takes no action.
Default Setting
no
Command Mode
Installer, Admin
Example
Installer# set config default yes
Installer#
5.6.3

set ClientSta status-update

This command enables/disables the saving of any changes to the running
configuration, in the SDRAM. Disabling this feature will result in all changes to
the running configuration being voided. If enabled, when the user has finished
making changes, the running configuration may then be saved to flash memory
using the "save-running" command.
Syntax
set ClientSta status-update <yes | no>
• yes - Enables recording updates to memory.
• no - No action.
SU-A-EZ Manual
File Commands
71