5.6.6
set tftpftp ptype
Selects FTP or TFTP for file transfer.
Syntax
set tftpftp ptype <ftp | tftp>
• ftp - Selects FTP.
• tftp - Selects TFTP.
Default Setting
tftp
Command Mode
Installer, Admin
Example
Installer# set tftpftp ptype ftp
Installer#
5.6.7
set tftpftp rfile
Specifies the name of the code file on the server. The new firmware file name
should not contain slashes (\ or /), the leading letter of the file name should not
be a period (.). (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
Syntax
set tftpftp rfile <file>
• file - The name of the file for transfer.
Default Setting
upgrade.tar
Command Mode
Installer, Admin
Example
Installer# set tftpftp rfile 1.00.14.tar
Installer#
5.6.8
set tftpftp sip
IP address of FTP or TFTP server.
Syntax
set tftpftp sip <IP address>
• IP address - IP address specified in the form xxx.xxx.xxx.xxx.
SU-A-EZ Manual
File Commands
73