Toshiba RAS-2M21U2ACVG-SG Service Manual page 85

No. Part name
⑧ PMV coil
1. Detachment
1) Perform step 1 in 2 , all the steps in 3 and
2) Turn the coil by 180 degrees then remove
1) Insert the coil at position which
perpendicular with pipe of PMV then turn
the coil by 180 degrees.
⑨ Fan guard 1.Detachment
1) Perform works ① and ②.
2) Remove the front cabinet, and put it down so
that fan guard side directs downward.
Perform work on a corrugated cardboard,
cloth, etc. to prevent flaw to the product.
3) Remove the hooking claws by pushing minus
screwdriver according to the arrow mark in the
right figure, and remove the fan guard.
2. Attachment
1) Insert claws of the fan guard in the holes of the
front cabinet. Push the hooking claws
(9 positions) by hands and fix the claws.
All the attaching works have completed.
Check that all the hooking claws are fixed to
the specified positions.
Procedure
1 in 4 .
by pull it upward.
Make sure that lead wire of coil
is opposite with pipe of PMV
Rotate 180°
BODY-PMV
- 85 -
Remarks
COIL-PMV