Advertisement
Installation process:
Step 1:
* Place the ink system on the right side of the printer.
* Press ink cartridge change button located on the front of the printer or please check your
printer manual for the instruction. The cartridges will move to the changing position.
* Unplug the printer so you can easily move the printer head later.
Step 3:
* Remove the cartridges cover lock picture 1
* Remove the cartridges holder cover Picture 2
Step 5:
Take the cartridges and carefully slide them under the bar as
shown on the right.
Rest the cartridges on the side of printer in order to perform the
next step.
Step 4:
* Move the printer head to the left side of the printer
Step 6:
* Move the printer head back to the changing cartridge position.
* Insert cartridges into printer. Place all eight straight down into printer carriage.
* Starting from left to right, gently press cartridges until cartridges lock into place.
* Note: The cartridges maybe a little big tight when pressing it down.
Step2:
* Locate the printer cartridges. Insert the screwdriver in
between the joint and gently remove the cover off.. Pic_1
* Being gentle, this should easily come off without
damaging the printer carriage cover.
* Now move on the right side of the cartridges holder
and remove the cartridges holder lock. Pic_2
Advertisement
