Download Print this page

Epson CISS 1400 Manual

Photo stylus

Advertisement

Quick Links

Visit
http://support.vtechplace.com
at
support@vtechplace.com
include the order number when sending an email.
Caution: Things you need to know
* Find an easy-to-clean place to work when working with ink.
* Most of the refillable cartridges & the cartridges come with the ciss that have auto reset chips that cannot be mixed with original
cartridges; the same situation applies for the non-auto reset chip cartridges.
* Do not use any software and / or chip re-setters to reset the chips as it may damage the auto reset chips.
* Do not tear off the seal at the bottom of the cartridges.
* Do not touch or scrape the chips.
* During printing do not disturb the external ink tank.
* Leave the external ink tank at the same level (see picture below).
Prepare Printer:
* Check the printer status to see whether it is normal or not, and check its mechanics for smooth and any damage.
* Printer a test sheet on the nozzle check to see if any gaps appear on the lines in the printout , Please check your printer manual for
information on how to print out the nozzle test page.
* If the printer shows broken lines, do the printer head cleaning untill those are good.
* If the printer is alright, then follow the step below for the installation instruction
Prepare the Continuous Ink System
a. Remove your CISS from the box and check the there are no leaks or cracks and that the silicone tubing is not damaged.
b. Inspect the silicone tubing for air pockets, If you have an excessive amount (15 inches or more) of air in the tubing, you will need to
prime the unit.
c. Please ensure the following are present with your CISS.
air filter, Syringes, Support arm
Remove air, Prime the empty CISS:
There are many way to prime the empty CISS, visit us
article we have, review it and choose with method is best for you
Epson Photo Stylus 1400 Printer CISS
http://www.vtechplace.com
if you have any questions. Please make sure you
for more detail and video instruction. Email us
http://support.vtechplace.com
search for
"prime the empty
CISS" you will see few

Advertisement

loading

Summary of Contents for Epson CISS 1400

  • Page 1 Epson Photo Stylus 1400 Printer CISS http://www.vtechplace.com Visit http://support.vtechplace.com for more detail and video instruction. Email us support@vtechplace.com if you have any questions. Please make sure you include the order number when sending an email. Caution: Things you need to know * Find an easy-to-clean place to work when working with ink.
  • Page 2 Installation process: Step 1: * Place the ink system on the right side of the printer. * Press ink cartridge change button located on the front of the printer or please check your printer manual for the instruction. The cartridges will move to the changing position. * Unplug the printer so you can easily move the printer head later.
  • Page 3 For better picture or maybe the video instruction Visit http://support.vtechplace.com click on Knowledgebase , Epson then your printer mode Step 8: * Move the printer head carriage all the way to the right. Make sure there is enough tubing to allow printer carriage to move freely to the right.
  • Page 4 How to reset and clear out the error message; "Ink cartridges cannot be recognized by the printer.” The picture in this Article is for Epson C120 printer but you can use this instruction for Epson R260, R280, R380, Epson stylus 1400 printers.