Table of Contents
Advertisement
DIRECTV PARA TODOS™ SYSTEM FROM HUGHES - OWNER'S MANUAL
In the CHANNEL LISTS screen, use the , , , and
keys to highlight the button that corresponds
to the channel number and list that you wish to change. Press the
key to add or remove the
check mark, which indicates that the channel in that row is included in the list shown at the top of the
column.
To help you decide whether to include or exclude a certain channel, the title of the currently airing
program for that channel will appear at the top of the screen.
Remember that when the digital satellite receiver is locked, only channels in the Family list can
be viewed. This means that even though a channel appears on the Fav. A, B, C, or All Channels list,
the selected channel must also be on the Family list in order to see or hear it.
For the Family List limit to be in force, the digital satellite receiver must be locked. Locking is
described earlier in this chapter. When the system is locked the passcode will be needed to modify the
settings of the channel lists.
TurboTune™
The TURBOTUNE SETUP screen is used to specify which nine channels that will appear in the
TurboTune pop-up panel that shows over video when
is
pressed.
Things to do in the TURBOTUNE
SETUP screen
Set Channel
Using the , , , and
keys, highlight one of the nine channel
boxes. You can enter the desired channel using the number keys on
the remote control, or by using the
and
. Pressing
while
highlighting one of the channel boxes will also initiate a pop-up
The TURBOTUNE setup screen
panel that will allow you to set the channel using the
and
keys
on the remote control or the digital satellite receiver's front panel.
Installation
The INSTALLATION screen provides the utilities that makes the setup and testing of your system
simple and convenient.
Places to go from the INSTALLATION
screen
System Test
The System Test button takes you to the SYSTEM TEST screen.
New Card
The NEW CARD screen provides a way for DIRECTV to distribute
The INSTALLATION screen
new access cards. Should you be issued a new card, you will need to
activate it. Follow the on-screen instructions carefully to initialize it.
Once the process has begun, your old access card will no longer allow viewing. You should not
interrupt the process once it has begun. An interruption could cause both the old and the new card to
become invalid. When the process is complete, your new access card will be usable, while the old card
will no longer be valid.
P
7-12
AGE
Advertisement
Table of Contents
