DirecTV H20 User Manual page 94

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the
interference by one or more of the following measures:
4 Reorient or relocate the receiving satellite dish antenna.
4 Increase the separation between the equipment and the DIRECTV Receiver.
4 Connect the equipment into an outlet on a circuit diff erent from that to which the DIRECTV Receiver is connected.
4 Consult the dealer or an experienced radio/TV technician for help.
4 CAUTION: Changes or modifi cations not expressly approved by the manufacturer responsible for compliance could
void the user's authority to operate the equipment.
Th e user may fi nd the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify
and Resolve Radio and TV Interference Problems." Th is booklet is available from the U.S. Government Printing Offi ce,
Washington, DC. To meet FCC requirements, only peripherals (computer input/output devices, terminals, printers, etc.)
certifi ed to comply with Class B limits may be attached to this device. Operation with non-certifi ed peripherals is likely to
result in interference to radio and TV reception. To meet FCC requirements, shielded cables are required to connect the
device to a personal computer, peripheral, or other Class B certifi ed device.
Th is equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the back of this
equipment is a label that contains a product identifi er in the format US:AAAEQ##TXXXX. If requested, this information
must be provided to your telephone company. Th is equipment uses the following USOC Jack: RJ11C. A plug and jack used
to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68
86