Connections; Overview - Supply Connections; Connecting The Mains Voltage; Connecting An External Timer - KBL megaSun space 2000 Manual

Connections

Overview - supply connections

1
2
3
1 Mains voltage aquaCool box
2 Audio connection / channel selection
3 aquaCool - air (blue)
4 Aroma
5 aquaCool - liquid
6 Connection of external timer (coin-box system)
7 Power supply
8 Data cable Tower/aquaCool-Box

Connecting the mains voltage

Live components
Risk of fatal injury due to electric shock
when touching live parts.
- Switch off mains voltage.
- Protect against re-connection.
Both the power supply and the related connection
work must comply with national standards, e.g. those
set up by VDE in Germany. The connection work
must only be performed by qualified expert staff.
The connection to the 400 V mains must be protected
by fuses. Their specifications are listed in the chapter
"Technical data".
8
7
6
5
4
DANGER!
A residual current-operated circuit breaker (RCD)
with short time delay is absolutely required. KBL AG
recommends the following type: KBL 3200 0770 00
(type (Typ ABB F 204 A - 40//0,03 AP-R)
Should the operation of the tanning unit cause any
interference in the power supply network, e.g. with
ripple-control systems (TRA), consult your power
supply company to have corresponding blocking
elements (audio frequency suppressors) installed.

Connecting an external timer

Connect the external timer (e.g. coin box, studio
control) according to the instructions supplied with
the timer. The following diagram shows the wiring of
the timer connection.
connection to the coin box/external timer
connection timer
M a n u a l e o p e r a t i v o | megaSun space 2000
L N
1 2 3 4 5 6 PE
9