Connecting An External Audio Source; Operation Using Different Audio Sources; Connecting The Channel Selection; Level Adjustment Studio Music - KBL megaSun space 2000 Manual

Connecting an external audio source

The cinch marked in the illustration is connected to
the external audio source where the line-out of the
sound player or the headphone/loudspeaker jack are
available for connection.
Operation using different
audio sources
The tanning unit can be operated using the following
audio sources:
• An internal audio source
• Various external audio sources
• All available audio sources
The audio source can be changed via the control
panel.
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES - LINE IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
• Studio music
• External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
10
M a n u a l e o p e r a t i v o | megaSun space 2000
EXTERNAL 100 V AUDIO SIGNAL ON STUDIO
CHANNEL (OPTIONAL FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by trained service
staff.
Connecting the channel
selection
The following diagrams show the wiring of the chan-
nel selection on the audio equipment's side, for pulse
coding as well as for BCD coding.
CHANNEL BCD 0
1
2
3
4

Level adjustment studio music

The voice / audio system components are installed in
the back part of the tower. The potentiometer which
serves to adjust the external audio signal level is
accessible through a maintenance hatch on the left
hand side of the tower. To avoid overdrive, select
the level adjustment accordingly. The level setting
BCD 1
0 0
1 0
0 1
1 1