Easy Setup (Resetting The Recorder) - Sony RDR-VX560 Operating Instructions Manual

Front Display
Adjusts the lighting of the front panel display.
Auto
Bright
Dimmer
Off
Command Mode
Changes the command mode of this recorder if
other DVD equipment is assigned the same
command mode. Be sure to match the command
mode of the supplied remote to the setting made
here. For details, see "If you have a Sony DVD
player or more than one Sony DVD recorder" on
page 22.
DVD 1
DVD 2
DVD 3
Factory Setting
Allows you to return the setup settings to their
default settings. Note that all of your previous
settings will be lost.
1
After step 3 on page 104, select "Factory
Setting," and press ENTER.
2
Select "Start," and press ENTER.
The setup settings return to their default
settings.
3
Press ENTER when "Finish" appears.
The power automatically turns off and then on
again, and the recorder is reset to the factory
settings.
When the "Easy Setup" display appears,
follow the instructions for Easy Setup
(page 23) from step 4.
106
US
Adjusts to low lighting when
power is off.
Maintains bright lighting
when power is off.
Maintains low lighting
regardless of whether power
is on or off.
Turns off the lighting when
power is off. Maintains the
lighting when power is on.
Select this if the default
command mode conflicts
with other DVD equipment.
Select this if the default
command mode conflicts
with other DVD equipment.
The default command mode
of the recorder.
Easy Setup
(Resetting the Recorder)
Select this to run the Easy Setup program.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Easy Setup," and press ENTER.
Easy Setup
Follow the guide to make initial settings.
Before you start,
Check that you have made all necessary connections.
Start
4
Select "Start," and press ENTER.
5
Follow the instructions for Easy Setup
(page 23) from step 5.
10:10 AM
Cancel