Table of Contents
Advertisement
S-Video/Component hookup
Make audio connections using the OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) jacks when you use S-VIDEO/Component hookup.
A Use this hookup if your TV has an S-VIDEO input jack
Connect an S-VIDEO cord (not supplied). You will enjoy high quality images.
DVD-VCR
or
or
Audio cord
(supplied)
Coaxial digital
cord (not
supplied)
to audio input
TV or AV amplifier
Notes
• Set "DVD S-Video Out" to "On" in the "SCREEN SETUP" menu (page 61) to view pictures
from the S-VIDEO jack.
• The connection using S-VIDEO OUT jack is only for the DVD player.
56
S-Video/Component hookup
DVD Settings and Adjustments
Audio Setup
"Audio Setup" allows you to set the sound
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
SET UP
mode, then press V/v to select
and press ENTER.
ENTER
2
Press V/v to select "Audio Setup," then press
ENTER.
ENTER
3
Press V/v to select the setup item from the displayed list:
"Dolby Digital," "MPEG," "DTS" or "Audio DRC."
ENTER
58
Audio Setup
l : Signal flow
(DVD only)
TV
S-VIDEO cord
INPUT
(not supplied)
S VIDEO
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical
digital input
SET UP
V/v/B/b
ENTER
DVD SETUP
(DVD)
Language Setup
Audio Setup
Screen Setup
Parental Setup
V v
ENTER
RETURN
SET UP
AUDIO SETUP
Dolby Digital
[ D-PCM ]
MPEG
[ PCM ]
DTS
[ Off ]
Audio DRC
[ Standard ]
V
v
B
b
RETURN
SET UP
B Use this hookup if your TV has component video input jacks
Connect your TV via the COMPONENT VIDEO OUT jacks using a component
video cord (not supplied) or three video cords (not supplied) of the same kind and
length. You will enjoy accurate colour reproduction and high quality images.
See page 54 for audio connections.
DVD-VCR
Component video cord
(not supplied)
l : Signal flow
(DVD only)
If your TV accepts progressive (525P/625P) format signals, you must use this
connection and then set "Progressive" to "On" in the "SCREEN SETUP" menu
(page 63). The PROGRESSIVE indicator lights up in orange when the DVD player
outputs progressive signals.
PROGRESSIVE indicator
Notes
• The connection using COMPONENT VIDEO OUT jack is only for the DVD player.
• Consumers should note that not all high definition television sets are fully compatible with
this product and may cause artifacts to be displayed in the picture. In case of progressive
scan picture problems, it is recommended that you switch the connection to the standard
definition output. If there are questions regarding your Sony set's compatibility with this
DVD player, please contact our customer service center.
4
Press B/b to select an item.
ENTER
5
Press SET UP to exit the menu.
SET UP
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Dolby Digital
• MPEG
Selects the type of MPEG audio signal.
The default setting is indicated in bold print.
PCM
MPEG
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off
On
1-13
(green)
(blue)
(red)
TV
(green)
(blue)
(red)
S-Video/Component hookup
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (OPTICAL or COAXIAL) jack.
Select this when the player is connected to an audio component
with a built-in MPEG decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.
continued
Audio Setup
57
59
Hide quick links:
Advertisement
Table of Contents
