Adjusting The Cutting Height; During Operation; Starting The Machine - Toro 21863 Manual

Adjusting the Cutting Height

Adjust the cutting height as desired. Set all wheels to the same cutting height

During Operation

Starting the Machine

1. Ensure that the battery pack is installed in the machine; refer to
2. Insert the electric-start button into the electric starter switch (A of
3. Squeeze the blade-control bar and hold it to the handle (B of
4. Press the electric-start button and keep it pressed until the motor starts (C of
Figure 9
Installing the Battery Pack (page
Figure
Figure
Figure 10
13
(Figure 9).
10).
10).
Figure 10).
g254131
12).
g293036