Daikin FTV-A Series Engineering Data page 12

Installation Guideline
Indoor Installation Guideline
1. Installing The Mounting Plate
• The mounting plate should be installed on a wall which can support the weight of the indoor unit.
1) Temporarily secure the mounting plate to the wall, make sure that the panel is completely level, and
mark the boring points on the wall.
2) Secure the mounting plate to the wall with screws.
Recommended mounting plate retention spots and dimensions
Indoor Unit FTV28/35/50A
Ç Recommended mounting plate
retention spots (7 spots in all)
117
Ø 65
49.5
10
Mounting plate
Mounting plate fixing screw
Place a leveler
on these tabs.
170 50
770
The mounting plate should be installed
on a wall which can support the weight
of the indoor unit
Use a tape measure as shown.
Position the end of the tape
measure at w
116.5
Ø 65
170 49.5
Through-the-wall
hole Ø 65mm
Drain hose position
unit : mm
All dimensions are in mm