Troubleshooting - Stanley ST-02-230-E Instruction Manual

NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER
Problem
Fan stays on when
heat shuts off.
Fan speed stays the
same when changing
settings.
Heating element
does not glow red.
Do not feel heat or
air flow.
© 2021, Obelis S.A. Registered Address:
Bd. Général Wahis, 53, 1030 Brussels, Belgium

Troubleshooting

Cause
1. Fan runs continuously
while the heater is
operating.
1. Fan speed stays
constant. Setting
changes amount of
heat output only.
1. Heating element is
made of stainless steel
and will not glow red to
produce heat.
1. No power to heater.
2. Desired room
temperature reached.
3. Heater does not heat
area in front of heater,
it will disperse heat
throughout room to
heat entire space.
12
SOURCE
Solution
1. Heater is operating
correctly.
1. Heater is operating
correctly.
1. Heater is operating
correctly.
1. Check power
connections /
connect heater to
power supply.
2. Thermostat will shut
off once desired
room temperature
is reached. Heater is
operating correctly.
3. Heater is operating
correctly.