NEVER LEAVE HEATER UNATTENDED
WHILE CONNECTED TO A POWER SOURCE.
Problem
Fan stays on when heat
shuts off.
Fan speed stays the
same when changing
settings.
Heating element does
not glow red.
Do not feel heat or air
flow.
© 2021 Obelis S.A Registered Address:
Bd. Général Wahis, 53, 1030 Brussels, Belgium
Troubleshooting
Cause
1. Fan runs
continuously
while the heater is
operating.
1. Fan speed stays
constant. Setting
changes amount of
heat output only.
1. Heating element is
made of stainless
steel and will not
glow red to produce
heat.
1. No power to heater.
2. Desired room
temperature
reached.
3. Heater does not
heat area in front
of heater, it will
disperse heat
throughout room to
heat entire space.
10
Solution
1. Heater is operating
correctly.
1. Heater is operating
correctly.
1. Heater is operating
correctly.
1. Check power
connections /
connect heater to
power supply.
2. Thermostat will shut
off once desired
room temperature is
reached. Heater is
operating correctly.
3. Heater is operating
correctly.