Disassembly of Differential Assembly
g259978
1.
Differential housing (2 each)
2.
Differential pin (6 each)
Inspecting the Differential Assembly
Greensmaster
®
eFlex 1021
20248SL Rev A
3.
Differential spur gear (6 each)
4.
Differential gear
1. Remove the 6 socket head screws (item 5 in
differential housing assembly (1) to the differential gear (4). Remove the
differential gear from the differential housing assembly.
2. Place the differential housing assembly on workbench. Pull each differential
housings (1) apart.
3. Use a press to remove the 6 differential pins (2) and 6 differential spur gears
(3) from the differential housings (1).
1. Clean all the differential assembly components.
2. Inspect all the differential spur gears (3) carefully looking for chipped teeth,
wear or other damage. Because gear tooth damage is rarely isolated to 1
gear, replace the gears as complete set if there is a internal damage.
3. Inspect the differential pins (2) for the scoring or wear.
4. Replace all the differential assembly components that are worn or damaged.
Figure 28
Page 4–33
Traction and Reel Drive Systems: Service and Repairs
5.
Socket head screw (6 each)
Figure
28) that secures the