Testing the CAN bus (continued)
Greensmaster
®
eFlex 1021
20248SL Rev A
g338672
Harness
Connector
Main
P14
Main
P14
Note: A reading of 120 ohms indicates the CAN bus terminator resistor is
not connected or damaged.
4. Refer to
CAN-bus Terminator Resistor (page 5–39)
schematic and wire harness drawing in
contact an Authorized Toro Distributor for assistance.
Figure 50
Pin
A
B
Appendix A (page
Page 5–25
Electrical System: Testing the Electrical Components
Wire Color
Expected
Reading
Yellow
54 to 66 ohms
Green
and/or see electrical
A–1). If necessary,