Toshiba VTW2187 User Manual page 11

Input Selection
If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing AV.
Press TV/VCR to select the TV mode and then
press AV repeatedly to select AV1 or AV2.
1. To connect the unit to a VCR
Press AV to select AV2 to use the TV as a monitor.
To Scart socket
2. To connect the unit to a TV Game
The unit can also be used as a display device for many video games. However, due to the wide variety of different types
of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the
suggested connection diagrams. Press AV to select AV2 to use the TV as a monitor. You'll need to consult each
component's Owner's Manual for additional information.
3. To connect the unit to a camcorder
To playback from a camcorder, connect the camcorder to the unit as shown.
Press AV to select AV2 to use the TV as a monitor.
If you wish to make a recording from the camcorder, follow the same instructions as recording a TV programme (P.20),
but select AV2 for the channel.
Camcorder
4. To connect the unit to another TV set (ie. a widescreen set)
Connect the unit and another TV set with a Scart cable.
Press AV to select AV1 to use the TV as a monitor (see P.48).
5N40301A [E] P01-09
of VCR
Scart cable (not supplied)
To Audio/Video OUT
Audio/Video cord (not supplied)
To Audio/Video OUT
Audio/Video cord (not supplied)
9
AV1(Scart socket)
AV2(Front AV input)
TV-program
Front of unit
VIDEO IN
Front of unit
VIDEO IN
Front of unit
VIDEO IN
12/24/04, 4:46 PM
AV1
AUDIO IN (R)
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (L)
AUDIO IN (R)
AUDIO IN (L)
9