Denon AVR-1803 Operating Instructions Manual page 20

ENGLISH
Before setting up the system
1
(Main unit)
2
3
NOTE:
Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time. The changes to the settings made
up to that point are entered.
Setting the speaker configuration
1
2
NOTE:
• When "Small" has been selected for the front speakers, "Large" cannot be selected for the center speaker.
3
NOTE:
• When "Small" has been selected for the front speakers, "Large" cannot be selected for the surround speakers.
20
Check that all the components are correct, then press the POWER operation switch on the main unit or
the POWER button on the remote control unit to turn on the power.
(Remote control unit)
Press the SYSTEM SETUP button to enter the setting.
NOTE: Please make sure the "AUDIO" position of the slide switch on the remote control unit.
Press the ENTER or
Use the (left) and
Press the ENTER or
Use the (left) and
Press the ENTER or
Use the (left) and
Press the ENTER or
(down) button to switch to the speaker configuration set up.
(right) buttons to select your front speaker type.
(down) button to switch to the center speaker setting.
(right) buttons to select your center speaker type.
(down) button to switch to the surround speaker setting.
(right) buttons to select your surround speaker type.
(down) button to switch to the surround back speaker setting.
(Initial)
(left) button (right) button
(Initial)
(left) button (right) button
(Initial)
(left) button (right) button