Denon AVR-1403 Operating Instructions Manual page 31

7 Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON
or
• PANORAMA setting
PANORAMA OFF
ON
or
• DIMENSION setting
DIMENSION 3
0
or
• CENTER WIDTH setting
CENTER WIDTH O
0
or
• DEFAULT setting
DEFAULT Y/N
Yes
or
Select "Yes" to reset to the factory defaults.
Stop pressing buttons once you have completed setting the
surround parameters. After several seconds the normal display
reappears and the settings you have made are automatically set.
OFF
or
OFF
or
3 6
or
4 7
or
Y/N No
or
NOTE:
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Surround parameters q
II
Pro Logic Mode:
The Cinema mode is for use with stereo television shows and all
programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for
autosound music systems (no video), and is optional for A/V
systems.
The Pro Logic mode offers the same robust surround processing
as original Pro Logic in case the source contents is not of optimum
quality.
Select one of the modes ("Cinema", "Music" or "Pro Logic").
Panorama Control:
This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall
imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front
or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from
the center speaker; only from the left/right speakers as a phantom
image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
ENGLISH
31