This Configuration Guide is written as general guide on how to configure the Grandstream
device model HT-701 to work with PBXware 4.1.
Requirements
Identifying phone model
To start and successfully complete registration of your Grandstream device you need to know
which phone model you will setup.
From the back of each Grandstream phone there are exact model information that you should
check. Although different phone models can have exactly the same requirements and
installation procedure, phone models can also have significantly different requirements and
installation procedure, so that ignorance of your own model may result in the inability to
successfully set up your device.
Phone firmware
Make sure that your device is loaded with appropriate firmware version,1.0.8.2.
To find out the firmware version of your Grandstream device model open a new browser
window and enter your phone IP address in order to access the phone web administration
interface login screen. Example: http://192.168.1.22.
Login to device web administration interface with your password. Please note, factory default
password is: admin.
DHCP server
Fully configured and operational DHCP server.
PBXware version
PBXware version
4.1.2.0
In order to find out the PBXware version: