Touchpad Click Board - HP 245 G8 Maintenance And Service Manual

3. Remove the bottom cover (see
4. Remove the battery (see
5. Remove the right hinge screw and lift the right hinge (see
Remove the power connector:
1. Disconnect the power connector cable (1) from the system board.
2. Lift the power connector (2) to remove it.
Reverse this procedure to install the power connector.

Touchpad click board

To remove the touchpad click board, use this procedure and illustration.
Table 5-11 Touchpad click board part descriptions and part numbers
Description
Touchpad click board
Touchpad board cable
Touchpad click board cable
Before removing the touchpad click board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page 28).
(Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page 28).
27).
Display assembly on page
26).
26).
27).
46).
Spare part number
L24486-001
L23184-001
L24485-001