Table of Contents
Advertisement
BASIC OPERATIONS
VFO frequency scanning limit
Setup the frequency of L1 channel, U1 channel, L2 channel and U2 channel will realize VFO frequency
scanning border limited. L1 and U1 must be in same frequency band. L2 and U2 in same frequency
band, When VFO frequency between L1 and U1 or L2 and U2, radio will scan between them. When VFO
frequency exceed L1 and U1 or L2 and U2, radio will scan whole frequency.
Turn On/ Off FM Radio
Under standby state, press
then press
key, LCD displays "FM ON" and current FM radio frequency, FM
1
radio function is on.
When FM radio is on, press
Or press
key, the top left corner of LCD displays "
A
turn off FM radio and return to transceiver state.
When FM radio is on, Re-start transceiver, FM radio function will still on.
You can listen to the FM radio in the background (any incoming call will silence the FM radio) by pressing
the [PTT] button or
#
CTCSS/DCS Setup
Under standby state, press
press
key, LCD displays "CT" icon, it means current channel add CTCSS
2
TONE
signal function. Repeat above operation, LCD displays "DCS" icon, it means current
channel add DCS signal function. Repeat above operation, "DCS" icon disappears,
current channel without CTCSS/DCS signal.
key, the top left corner of LCD displays "
A
key, LCD displays "FM OFF", FM radio is mute.
key.
key, the top left corner of LCD displays "
A
" icon,
" icon, press
key to
1
" icon,
16
Hide quick links:
Advertisement
Table of Contents
