Windows 95 Operating Systems Not Installed By Dell - Dell Precision 410 User Manual

10. Insert the NIC driver diskette 2 into drive A, and
select Yes (Recommended).
11. Click Next and then click Finish to access the
Insert Disk dialog box.
12. Click OK to access the Copying Files dialog box.
Type a:\, and then click OK.
The Windows 95 operating system begins to copy
files to the system's hard-disk drive.
13. When you are prompted for the location of addi-
tional files, specify the c:\windows\options\cabs
directory on your hard-disk drive or the \win95
directory on your CD-ROM drive. Then click OK
to access the System Properties dialog box.
The Windows 95 operating system finishes copying
all of the files to the system's hard-disk drive.
14. When the System Settings Change dialog box
appears, remove the diskette from drive A and
click Yes to restart the system.
15. When the system restarts, the Enter Network
Password dialog box appears. Enter the user-
name and password you want to use for network
access.
See your Windows 95 documentation for informa-
tion about usernames and passwords.
Windows 95 Operating Systems Not
Installed by Dell
To reinstall the NIC driver in a system running a Win-
dows 95 operating system not installed by Dell, perform
the following steps:
1. Use the Dell DiskMaker program (located in the
Dell Accessories program folder) to make a dis-
kette copy of the NIC drivers installed on your
hard-disk drive.
2. Connect the network cable to the back of your
computer.
See "Network Cable Requirements" found earlier in
this chapter for detailed instructions.
5-4 Dell Workstation Mini Tower Systems User's Guide
3. Verify that the integrated NIC is enabled and
connected to its network.
See "NIC" in Chapter 3 for more information.
4. Start the Windows 95 operating system.
5. Click the Start button, point to Settings, and click
the Control Panel. Then double-click the System
icon.
6. In the System Properties window, click the Device
Manager tab. In the list of system devices, double-
click Other Devices. Then select PCI Ethernet
Controller, and click Properties to access the PCI
Ethernet Controller window.
7. Select the Driver tab, and then click Change
Driver to access the Select Hardware Type dialog
box.
8. Select Network Adapter, and then click OK to
access the Select Device window.
9. Click Have Disk to access the Install From Disk
dialog box.
10. Insert the NIC driver diskette 2 into drive A, and
click OK.
The system reads the files on diskette and then dis-
plays the Select Network Adapters window.
11. Select 3Com Fast EtherLink XL 10/100Mb
Ethernet Adapter, and click OK to access the PCI
Ethernet Controller Properties dialog box.
12. Click OK to access the Network dialog box. Enter
your computer name and workgroup/domain.
Then click Close.
13. Click OK in the Insert Disk dialog box.
14. When prompted for the location of additional
files, specify the c:\windows\options\cabs directory
on your hard-disk drive or the \win95 directory
on your CD-ROM drive. Then click OK to access
the System Properties dialog box, and click OK.
15. Remove the diskette from drive A. Click the Start
button, click Shutdown, and then select Restart
the Computer.
16. Click Yes when prompted to restart the system.