Table B-2. System Board And Riser Board Connectors And Sockets - Dell Precision 410 User Manual

Table B-2. System Board and Riser Board Connectors and Sockets

Connector or Socket
BATTERY
CD-IN
DIMM x
DSKT
ENET
FAN
IDE n
ISA n
(on riser board)
*
JHDLED (on riser board)
KYBD
LINE-IN
LINE-OUT
MIC-IN
MOUSE
PANEL
PARALLEL
PCI n
* (on riser board)
POWER1
POWER2
RISER
SERIAL n
SLOT1_PRI
SLOT1_SEC
USB1/2
VIDEO (two connectors on riser board)
* The following connector pairs each share a single card-slot opening, so that only one of each pair can be used: ISA2/PCI5;
ISA1/PCI4.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.
B-4 Dell Workstation Mini Tower Systems User's Guide
Description
Battery socket
CD-ROM drive audio interface connector
DIMM socket
Diskette/tape drive interface connector
NIC connector
Microprocessor fan connector
EIDE interface connector
ISA expansion-card connectors (on riser board)
Hard-disk drive access indicator connector
Keyboard connector
Line-in jack
Line-out jack
Microphone jack
Mouse connector
Control panel connector
Parallel port connector; sometimes referred to as LPT1
PCI expansion-card connectors (on riser board)
Main power input connector
3.3-V power input connector
Riser board connector
Serial port connectors; sometimes referred to as COM1 and COM2
Primary Pentium II processor SEC cartridge connector
Secondary Pentium II processor SEC cartridge connector
USB connectors
The bottom two connectors on the riser board, either of which will
accept the add-in PCI video card