Installtion - Kenwood KRC-PS959R Instruction Manual

Connect ing Cables t o Term inals
2WA RN IN G
Connecting the ISO Connector (see p.39)
The pin arrangement for the ISO connectors depends on the type
of vehicle you drive. M ake sure to make the proper connections to
prevent damage to the unit.
The default connection for the w iring harness is described in
below . If the ISO connector pins are set as described in 2 or 3 ,
make the connection as illustrated.
1 (Default setting) The A-7 pin (red) of the vehicle' s ISO
connector is linked w ith the ignition, and the A-4 pin (yellow ) is
connected to the constant pow er supply.
Unit
Ignition cable (Red)
Battery cable (Yellow )
2 The A-7 pin (red) of the vehicle' s ISO connector is connected to
the constant pow er supply, and the A-4 pin (yellow ) is linked to
the ignition.
Unit
Ignition cable (Red)
Battery cable (Yellow )
3 The A-7 pin (red) of the vehicle' s ISO connector is not
connected to anything, w hile the A-4 pin (yellow ) is connected
to the constant pow er supply (or both the A-7 (red) and A-4
(yellow ) pins are connected to the constant pow er supply).
Unit
Ignition cable (Red)
Battery cable (Yellow )
Downloaded from: http://www.usersmanualguide.com/
Vehicle
A–7 Pin (Red)
A–4 Pin (Yellow )
Vehicle
A–7 Pin (Red)
A–4 Pin (Yellow )
Vehicle
Connect to a pow er source that can be
turned on and off w ith the ignition key.
A–4 Pin (Yellow )
Inst allt ion
Installation
Firew all or metal support
1
Accessory 3
Self-tapping
M etal mounting
screw
strap
(commercially
(commercially
available)
available)
N OTE
M ake sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
2CA U TION
To attach this unit, fit it into the mounting sleeve by pressing the four
corners of the hard rubber frame.
Do not apply strong pressure to other sections than the corners;
otherw ise troubles such as the impossibility of opening or closing the
panel may result.
— 40 —
Bend the tabs of the
mounting sleeve w ith
a screw driver or
similar utensil and
attach it in place.