108
Adding and Replacing Pa rts
Pull the drive out of the bay.
5
Slide the new drive into the bay until the drive is fully seated.
6
Replace the screw that you removed in step 3.
7
Replace the memory module cover and screw.
8
Keyboard
Complete the instructions in "Before You Add or Replace Parts" on
1
page 100.
Use a small flat-blade screwdriver or plastic scribe to lift the notched
2
right edge of the hinge cover, and pry the cover loose from the hinges
and bottom case.
Lift the hinge cover up and away from the hinges and bottom case.
3
Remove the four keyboard screws.
4
hinge cover