When Using Your Computer - Dell Precision 650 System Information Manual

Models whl, dhs, dhm, and whm
Hide thumbs Also See for Precision 650:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

When Using Your Computer

As you use your computer, observe the following safe-handling guidelines.
CAUTION: Do not operate your computer with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, and so on) removed.
Your computer is equipped with one of the following:
A fixed-voltage power supply — Computers with a fixed-voltage power supply do not
have a voltage selection switch on the back panel and operate at only one voltage (see
the regulatory label on the outside of the computer for its operating voltage).
An auto-sensing voltage circuit — Computers with an auto-sensing voltage circuit do
not have a voltage selection switch on the back panel and automatically detect the
correct operating voltage.
A manual voltage selection switch — Computers with a voltage selection switch on
the back panel must be manually set to operate at the correct operating voltage.
To help avoid damaging a computer with a manual voltage selection switch, set the switch
for the voltage that most closely matches the AC power available in your location.
NOTICE: The voltage selection switch must be set to the 115-V position even though the AC power
available in Japan is 100 V.
Also, ensure that your monitor and attached devices are electrically rated to operate with
the AC power available in your location.
Before working inside the computer, unplug the computer to help prevent electric shock
or system board damage. Certain system board components continue to receive power
any time the computer is connected to AC power.
8
System Infor mation Guide

Advertisement

Table of Contents
loading

Table of Contents