18.2.1.3
To Remove Electronic Controller
18.2.1.4
To Remove Discharge Grille
8
Figure 3
Pull out the main
electronic controller.
5
Detach the Earth wire
screw, lead wires AC306
(Black) and AC304 (Red)
from the terminal board.
5
Remove screw to remove
terminal board complete
and earth wire.
6
Detach the indicator
connector then remove
the indicator complete.
Figure 5
149
9
Detach connectors as labeled from the
electronic controller. Then pull out the main
controller gently.
Figure 4
AC303
CN-FM
CN-CNT
CN-STM1
CN-STM2
CN-STM3
CN-RMT
CN-RCV
CN-TH