U
N L O C K T H E S C A N N E R
button).
R
E S T A R T T H E C O M P U T E R A N D T R Y T H E S C A N N E R A G A I N
C
H E C K T H E C A B L E C O N N E C T I O N S
• See the scanner documentation for cable connection information.
• Ensure that the scanner cables are securely connected to the scanner and the computer.
E R I F Y T H A T T H E S C A N N E R I S R E C O G N I Z E D B Y
V
1
Click Start, click Control Panel, and then click Printers and Other Hardware.
2
Click Scanners and Cameras.
If your scanner is listed, Windows recognizes the scanner.
E I N S T A L L T H E S C A N N E R D R I V E R
R
Sound and Speaker Problems
CAUTION:
Before you perform any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
No sound from speakers
NOTE:
The volume control in MP3 and other media players may override the Windows volume setting. Always
check to ensure that the volume on the media player(s) has not been turned down or off.
C
H E C K T H E S P E A K E R C A B L E C O N N E C T I O N S
the setup diagram supplied with the speakers. If you purchased a sound card, ensure that the speakers
are connected to the card.
N S U R E T H A T T H E S U B W O O F E R A N D T H E S P E A K E R S A R E T U R N E D O N
E
supplied with the speakers. If your speakers have volume controls, adjust the volume, bass, or treble to
eliminate distortion.
A
D J U S T T H E
W
I N D O W S V O L U M E C O N T R O L
corner of your screen. Ensure that the volume is turned up and that the sound is not muted.
— Ensure that your scanner is unlocked (if the scanner has a locking tab or
—
— See the scanner documentation for instructions.
— Ensure that the speakers are connected as shown on
— Click or double-click the speaker icon in the lower-right
I C R O S O F T
I N D O W S
M
W
— See the setup diagram
—
Solving Problems
61