Connecting A Television (Tv); Changing The Display Settings - Dell Dimension 9200 Owner's Manual

Connecting a Television (TV)

NOTE:
See the documentation that came with your TV to ensure that you properly configure and connect the TV.
NOTE:
To connect a TV to your computer, an S-video cable is required. If you do not have an S-video cable, you
may purchase one at most consumer electronics stores. An S-video cable is not included with your computer.
1 Follow the procedures in "Before You Begin" on page 77.
2 Connect one end of the S-video cable to the TV-OUT connector on the back of the computer.
3 Connect the other end of the S-video cable to the S-video input connector on your TV.
4 Connect a VGA or DVI monitor (see "Connecting Monitors" on page 17).

Changing the Display Settings

1 After you connect the monitor(s) or television, turn on the computer.
®
The Microsoft Windows
2 Enable clone mode or extended desktop mode in the display settings.
• In clone mode, both monitors display the same image.
• In extended desktop mode, you can drag objects from one screen to the other, effectively doubling
the amount of viewable work space.
For information on changing the display settings for your graphics card, see the user's guide in the Help
and Support Center (click the Start button, click Help and Support, click User and system guides, click
Device guides, and then click the guide for your graphics card).
For dual-monitor capable cards with one DVI connector and one VGA connector
One DVI connector and one VGA connector:
DVI
Use the appropriate connector(s) when you want to
connect your computer to one or two monitors.
®
desktop displays on the primary monitor.
VGA
Two VGA connectors with one VGA adapter:
VGA
Use the DVI-to-VGA adapter when you want to connect
your computer to two VGA monitors.
Setting Up and Using Your Computer
VGA
19