Table of Contents
Advertisement
support.dell.com
Disk Drives Screen
Figure B-4. Disk Drives Screen Menu
Table B-5. Disk Drives Screen Menu Options
Option
Function
Floppy Drive A
Selects the type of diskette drive. Valid selections are
1.44 MB, 3.5-inch (default); 2.88 MB, 3.5-inch; 720 KB,
3.5-inch; or None.
Floppy Drive B
Because the chassis supports only one diskette drive, this
option should be set to None.
IDE Primary
Identifies the first drive attached to the primary EIDE inter-
Channel Master
face, usually the boot hard-disk drive. See "IDE Primary
Channel Master Submenu" found later in this appendix.
IDE Primary
Identifies the second drive attached to the primary EIDE
Channel Slave
interface, if there is one. The format of this submenu is the
same as the one described in "IDE Primary Channel Master
Submenu" found later in this appendix.
IDE Secondary
Identifies the first drive attached to the secondary EIDE
Channel Master
interface, usually a CD-ROM drive. The format of this sub-
menu is the same as the one described in "IDE Primary
Channel Master Submenu" found later in this appendix.
IDE Secondary
Identifies the second drive attached to the secondary EIDE
Channel Slave
interface, if there is one. The format of this submenu is the
same as the one described in "IDE Primary Channel Master
Submenu" found later in this appendix.
NOTE: The Glossary in the system Help defines abbreviations and acronyms.
System Setup Program
B-7
Advertisement
Table of Contents
