Closing The Computer Cover - Dell Dimension 4700C Owner's Manual

NOTICE:
the computer.
7 Connect your computer and devices to electrical outlets, and turn them on.
8 Enter system setup (see page 86) and restore the settings you recorded in step 1.
9 Properly dispose of the old battery. See the Product Information Guide for battery disposal
information.

Closing the Computer Cover

CAUTION:
located in the Product Information Guide.
1 Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2 Ensure that no tools or extra parts are left inside the computer.
3 Close the cover:
Pivot the cover down.
a
Press down on the right side of the cover until it closes.
b
Press down on the left side of the cover until it closes.
c
Ensure that both sides of the cover are locked. If not, repeat all of step 3.
d
NOTICE:
the computer.
4 Connect your computer and devices to electrical outlets, and turn them on.
80
Removing and Installing Parts
To connect a network cable, first plug the cable into the network device and then plug it into
Before you begin any of the procedures in this section, follow the safety instructions
To connect a network cable, first plug the cable into the network device and then plug it into