Changing The Display Settings; Setting Up A Home And Office Network; Connecting To A Network Adapter - Dell Dimension 4700 Series Owner's Manual

Changing the Display Settings

1
After you connect the monitor(s) or television, turn on the computer.
®
The Microsoft Windows
2
Enable clone mode or extended desktop mode in the display settings.
• In clone mode, both monitors display the same image.
• In extended desktop mode, you can drag objects from one screen to the other, effectively
doubling the amount of viewable work space.
For information on changing the display settings for your graphics card, see the user's guide in
the Help and Support Center (click the Start button, click Help and Support, click User and
system guides, click Device guides, and then click the guide for your graphics card).

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTE:
Plug the network cable into the network adapter connector on the computer. Do not plug the
network cable into the modem connector on the computer. Do not plug a network cable into a telephone
wall jack.
1
Connect the network cable to the network adapter connector on the back of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
2
Connect the other end of the network cable to a network device.
network adapter connector
®
desktop displays on the primary monitor.
network adapter connector on computer
network cable
Setting Up and Using Your Computer
network device
15