Husqvarna LB 548 i Workshop Manual page 29

7.9.5 To remove the battery box
To remove and install the power unit on
1. Refer to
page 25 , To remove the cover from the power unit
on page 26 and To remove the battery control box
on page 28 .
2. Remove the 4 screws and remove the battery box.
7.9.6 To remove the key switch
To remove and install the power unit on
1. Refer to
page 25 , To remove the cover from the power unit
on page 26 and To remove the battery box on page
29 .
2. Turn the battery box with the top down.
1410 - 001 -
3. Remove the 3 screws and remove the bracket (A).
4. Remove the 7 screws. Remove the key switch (B). If
it is necessary, replace the key switch.
B
5. Remove the brackets (C) and (D) and the cables
that are attached to them. If it is necessary, replace
the brackets.
A
D
C
Repair instructions - 29