Table of Contents
Advertisement
2. TIME SYNCHRONIZATION VIA BLUETOOTH COMMUNICATION
Registration of Watch
■
Precautions on Using Time Synchronization
Function via Bluetooth Communication
When using the time synchronization function via Bluetooth
communication, please observe the following:
CAUTION
※ Keep the dedicated application running at all times.
※ Keep your smartphone within 3 meters from the watch.
※ In the places where use of radio waves is prohibited, such as in
airplanes and hospitals, turn off the automatic reception function
of the watch, and do not perform manual reception.
※ Your watch is compliant with or certified by the radio law of
various countries and regions. Use of it in areas other than those
may be illegal and subject you to punishment. (Refer to
●
Before using the watch with a smartphone for the first time, be sure
to register it to the dedicated application. Registration procedure is no
longer required for Bluetooth communication thereafter.
■
Before Registering the Watch
●
For the information on downloading and installation of the
dedicated application "Time Connect," refer to the "Application
Operating Guide for N8 Series Watches".
（ https://www.seikowatches.com/jp-ja/customerservice/bluetooth)
1. Enable the Bluetooth function on the smartphone.
※ The method of enabling the Bluetooth function differ s
depending on the model of the smartphone. For details, please
refer to the instruction manual for your smartphone.
2. Start up the dedicated application "Time Connect."
While registering the watch, make sure that the application screen
is kept displayed on the smartphone.
■
To Start Registration
①
Checking that the watch is in TIME mode, press and hold Button
Ⓑ
at the 3 o'clock position for more than 2 seconds. The hour
hand and minute hand point to the 3 o'clock position, and the
communication with the smartphone starts.
P .
5.)
[ Press and hold Button
②
C heck that the registration of the watch is completed successfully.
When the watch connects with the application of the smartphone,
"Watch registered" is shown on the application screen, indicating
that the watch has been successfully registered to the application.
Each time the watch is used with a new smartphone, be sure to
install the dedicated application on the smartphone, and follow the
procedure in "Registration of Watch" above.
11
Ⓑ
Button
Press and
hold for
more than
2 seconds
Ⓑ
for more than 2 seconds in TIME mode]
Advertisement
Table of Contents
