Table of Contents
Advertisement
Frequently Asked Questions
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
This section only lists faults that you can remedy yourself. All other faults are
shown in
Fault FXX
Technical faults
Problem
The dishwasher does
not start.
The dishwasher stops
during a program.
After the program has
started, the in-operation
indicator light is not vis-
ible.
80
.
Possible cause and solution
The door is not properly closed.
Raise the door upward until the catch engages.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the breaker (see data tag for the correct fuse
rating).
If the breaker trips again, contact Miele Customer
Service.
The dishwasher is not turned on.
Turn the dishwasher on using the sensor button.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
If the circuit breaker trips again, contact Miele
Customer Service.
The reflector panel was not correctly fitted.
Re-fit the reflector panel correctly (see installation
sheet).
Advertisement
Table of Contents
