Table of Contents
Advertisement
Fault messages
Problem
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Fault F XX: A fault has
occured, turn the appliance
off then back on again.
Restart the program. If the
fault occurs agian, contact
Miele Service.
Waterproof fault. Turn
the appliance off, close the
water supply and contact
Miele Service.
Fault F 78: A technical
fault has occcurred. Turn off
the appliance, close the wa-
ter supply and contact Miele
Service.
Frequently Asked Questions
Possible cause and solution
Before remedying the fault:
Turn off the dishwasher.
There may be a technical fault.
Turn the dishwasher back on after a few seconds.
Select the desired program.
Close the door.
If the fault message appears again, there is a techni-
cal fault.
Turn off the dishwasher.
Turn off the water supply.
Contact Miele Customer Service.
The Waterproof system has reacted.
Turn off the dishwasher.
Turn off the water supply.
Contact Miele Customer Service.
Circulation-pump fault.
Turn off the dishwasher.
Turn the dishwasher back on.
Select the desired program.
Close the door.
If the fault message appears again, there is a techni-
cal fault.
Turn off the dishwasher.
Turn off the water supply.
Contact Miele Customer Service.
81
Advertisement
Table of Contents
