Table of Contents
Advertisement
Settings
AutoDos (AutoDos)
If you later wish to change the fill level
or dispensing amount of the PowerDisk,
you can adjust the pre-set values ac-
cording to the information on the pack-
aging.
These settings are important in order for
the
PowerDisk almost empty
be displayed correctly. These settings
have no influence on the amount of de-
tergent dispensed in each rinse pro-
gram.
Setting the PowerDisk fill level
The PowerDisks currently available con-
tain 400 g of detergent.
Select the
PowerDisk fill level
tion and confirm with OK.
Enter the PowerDisk fill quantity and
confirm with OK.
Setting the Dosage amount
The PowerDisks currently available dis-
pense approximately 7 g of detergent
per rotation.
Select the
Dosage amount
tion and confirm with OK.
Select the dispensing quantity of the
PowerDisk and confirm with OK.
106
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
message to
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.
menu op-
menu op-
Advertisement
Table of Contents
